NEW TV!!

 

PROGRAM YOUR REMOTE
FOR YOUR NEW TV

nova

Programming Entone (Nova) Remote Control to Television:

Step 1-  Turn on your device.


Step 2 – On the remote control, press the corresponding Device Control key (TV / STB / DVD / AU X) to choose the device mode.


Step 3 – Press and hold “SETU P” key until the LED blinks twice.


Step 4 – Press number keys “9” – “9” – “1”.


Step 5 – Press “Power” key.


Step 6 – Press “CH +” key repeatedly until your device turns off.


Step 7 – Press and hold “SETU P” key until LED blinks twice to save the working code.

For detailed manufacture instructions, click here.

 


Programming Entone v4.x (Black, Peanut-Shaped) Remote Control to Television:

Step 1 – Power on the device. On the remote control, press and hold TV for five seconds. Once the button illuminates, release.

Step 2 – Press POWER once, and aim your new remote at the TV.

Step 3 – Press either CHANNEL UP or CHANNEL DOWN to perform a device auto-scan.

Step 4 – In this search mode, the remote control will send IR codes from the library in 5-second intervals. The TV key will be on and blink every five seconds while in the TV scan mode.

Step 5 – If the TV turns off, a working code has been found. Press OK once to lock in the code. The selected mode key will blink twice.

Step 6 – If all code sets of that device are exhausted in the search, and OK is not pressed, the TV key will quickly blink seven times, and the search mode will be terminated.

Step 7 – For more detailed instructions click here
For complete manufacturer’s instructions click here

 

entone2

entone1

Programming Entone v3.x (Silver, Bar-Shaped) Remote Control to Television:

Step 1 – Power on the device. On the remote control, press the TV key once. Then press and hold SETUP until the device key blinks twice, then release SETUP.

Step 2 – Press POWER once, and aim your new remote at the TV.

Step 3 – Press either CHANNEL UP or CHANNEL DOWN to perform a device auto-scan.

Step 4 – In this search mode, the remote control will send IR codes from the library in 5-second intervals. The device key will be on and blink every five seconds while in scan mode.

Step 5 – If the device turns off, a working code has been found. Press OK once to lock in the code. The selected mode key will blink twice.

Step 6 – If all code sets of that device are exhausted in the search, and OK is not pressed, the selected device key will quickly blink seven times, and the search mode will be terminated.

Step 7 – For detailed manufacture instructions, click here.